China Super Purchasing for huizhou Multilayer Gold Finger Pcb Manufacture,Pcb Manufacturing,Printed Circuit Board factory and manufacturers | Yongmingsheng
Welcome sa atong website.

Super Purchasing for huizhou Multilayer Gold Finger Pcb Manufacture,Pcb Manufacturing,Printed Circuit Board

Mubo nga paghulagway:

PCB Type: 6 layer PCb

 

 

 

Min track/gap  3.2mil/4mil

 

 

 

Min hole: 0.2mm

 

 

 

Board thickness: 1.0mm

 

 

 

Surface : ENIG

 

 

 

Size  215.3*90.3mm

 

 

 

Specialty:  120U” AU thickness for gold finger

 

 


Detalye Product

Mga Tags sa Produkto

Guide to PCB Gold Fingers

In today’s computerized and mobile-activated world, signals are sent between numerous devices. For each command to be enacted, communication must be made between two or more circuit boards. None of this would be possible without gold fingers, which serve as the connecting contacts between motherboards and components like graphics or sound cards.

The technology used to transmit these signals and commands is a huge leap forward from earlier electronics, which typically consisted of separate modules that were difficult to bring into communication with one another. With gold fingers, the processes of one circuit board are immediately read by the main processing board.

The processes associated with this advanced technology extend across all corners of the public and private sectors. In the world of manufacturing, signals are sent between various devices and machines to enact a series of processes, many of which could not be carried out by human hands. At auto-assembly factories and food-packaging plants, numerous commands are fulfilled by computer-prompted machinery, most of which use circuit boards of one size or another.

Many of today’s industrial processes are made possible by gold fingers.

What is gold finger in PCB?

  Gold finger is the connector at the edge of boards. It is similar to fingers, so we called gold finger, please see the following pictures. It is used to protect the printed circuit board prototypes from wear and tear. The surface treatment of the gold finger PCB.

What is gold on a circuit board?

  Random Access Memory Chips (RAM) - A part of the circuit board, these little gold mines are installed to increase the operational memory of your computer. They often contain a small but a significant amount of gold-plated pins, and a thin layer of gold on their surfaces.

Basaha ang dugang nga balita


https://www.ymspcb.com/super-purchasing-for-shenzhen-multilayer-gold-finger-pcb-manufacturepcb-manufacturingprinted-circuit-board.html


  • Balik:
  • Next:

  • Isulat ang imong mensahe dinhi ug ipadala kini ngadto sa kanato
    WhatsApp Online Chat!