Rigid flex pcb manufacturer HDI staggered vias Stiffener| YMSPCB

Koarte beskriuwing:

Rigid flex circuit boards combine the best of both rigid boards and flexible circuits integrated together into one circuit. Bend radius controls the flexibility of the flex portion of the board. The thinner the material the lower the bend radius and the more flexible the flex section.

parameters

Lagen: 6L HDI Rigid Flex PCB

Board Thinkness: 0.6mm +/- 0.1mm

PCB-dikte yn flexseksje: 0,1 mm

Basismateriaal: PI + FR4PP

Min meganyske gatten ： 0,15 mm

Minimale rigelbreedte / klaring ： 0.05mm / 0.05mm (2mil / 2mil)

Minimale ôfstân tusken binnenlaach PTH en line ： 0.2mm

Grutte ： 160.4mm × 163.2mm

Aspektferhâlding ： 4: 1

Oerflak treatment: enig

Spesjaliteit: stive flex pcb HDI staggered vias Stiffener Edelstiel, Laser fia koper plateare sluten

Differinsjele impedânsje 100 + 7 / -8Ω

Applikaasjes: TWS-earphones

E-post stjoere oan ús Download as PDF

produkt Detail

produkt Tags

Wat is in stive Flex PCB?

Rigid-Flex printplaten binne ûntwurpen om oplossingen te leverjen, en fungearje as ferfangers foar stive PCB's. Lykas de namme al fermoeden docht, binne dizze printplaten in hybride fan fleksibele en stive sirkwy. It foardiel fan dit type is dat se de foardielen fertoane fan sawol stive as fleksibele printplaten.

YMS Rigid Flex PCB- produksjekapaliteiten :

YMS Rigid Flex PCB produksje mooglikheden oersjoch
Eigenskip	mooglikheden
Laach telle	2-20L
Stiif-Flex dikte	0.3mm-5.0mm
PCB-dikte yn flex-seksje	0,08-0,8mm
koper Dikte	1 / 4OZ-10OZ
Minimale rigelbreedte en romte	0.05mm / 0.05mm (2mil / 2mil)
Stifters	Rustfrij stiel, PI, FR4, Aluminium ensfh.
Materiaal	Polyimide Flex + FR4, RA koper, HTE koper, polyimide, lijm, Bondply
Min meganyske boarre Grutte	0,15 mm (6mil)
Min laser gatten Grutte:	0,075mm (3mil）
Oerflakte ôfwurking	Geskikt mikrofoave / RF-PCB-oerflakôfwurkingen: Elektroleaze nikkel, Immersion Gold, ENEPIG, Leadfrije HASL, Immersion Silver.etc.
Solder Masker	Grien, read, giel, blau, wyt, swart, pears, mat swart, mat grien. Ensfh.
Covrelay (Flex Part)	Giele omslach, Wyt omslach, Swarte omslach

Faaks brûkte FPC-styfdikte
Stiffener Materiaal	Gewoane dikte	Ungewoane dikte
FR-4	0.2mm (8mil)	0.1mm (4mil)
	0.3mm (12mil)	0,9 mm (35 mil)
	0.4mm (16mil)	1.1mm (43mil)
	0.5mm (20mil)	1.3mm (51mil)
	0.6mm (24mil)	1.4mm (55mil)
	0.7mm (28mil)	1.6mm (63mil)
	0,8 mm (32 mil)
	1.0mm (39mil)
	1.2mm (47mil)
	1.5mm (59mil)
Polyimide (PI)	0.1mm (4mil),	0,075mm (3mil)
	0,15 mm (6mil),	0.125mm (5mil)
	0.2mm (8mil),	0.175mm (7mil)
	0,25mm (10mil)	0.225mm (9mil)
		0.275mm (11mil)
Rustfrij stiel	0.1mm (4mil)	0.45mm (18mil)
	0,15 mm (6mil)
	0.2mm (8mil)
	0,25mm (10mil)
	0.3mm (12mil)
	0.35mm (mil)
	0.4mm (16mil)
	0.5mm (20mil)
	1.5mm (59mil)