| Nka na ụzụ index | Mass ogbe | obere ogbe | sample | ||
| Base ihe | FR4 | nkịtị Tg | Shengyi S1141, KB6160, Huazhen H140 (adabara ụzọ free usoro) | ||
| Middle Tg | N'ihi HDI, multi n'ígwé: SY S1000H, ITEQIT158, HuazhengH150; Tu-662; | ||||
| Akwa Tg | N'ihi na oké ọla kọpa, elu oyi akwa: SY S1000-2; ITEQIT180A; HuazhengH170; Isola: FR408R; 370HR; tu-752; | ||||
| Halogen anaghị akwụ ụgwọ | Middle Tg: SY S1150G, HuazhengH150HF, H160HF; elu Tg: SY S1165 | ||||
| Akwa CTI | CTI≥600 SY S1600, Huazheng H1600HF, H1600A; | ||||
| Nnukwu Frequency | Rogers, Arlon, Taconic, SY SCGA-500, S7136; HuazhengH5000 | ||||
| Oke ọsọ | SY S7439; tu-862HF, tu-872SLK; Isola: I-Speed, I-Tera @ MT40; Huazheng: H175, H180, H380 | ||||
| Flex ihe | Isi | Mama-free: Dupont AK XingyangW-ụdị, Panosonic RF-775; | |||
| Ihe mkpuchi | SY SF305C, Xingyang Q-ụdị | ||||
| Special eyi | Ọ dịghị eruba eyi: VT-447LF, Taiguang 370BL Arlon 49N | ||||
| Efere jupụtara nyagide mpempe akwụkwọ: Rogers4450F | |||||
| PTFE nyagide mpempe akwụkwọ: Arlon6700, Taconic fr-27 / fr-28 | |||||
| Abụọ-kwadoro coatingPI: xingyang N-1010TF-mb | |||||
| metal Base | Berguist Al-isi, Huazheng Al-isi, chaosun Al-isi, copperbase | ||||
| Ọpụrụiche | High okpomọkụ na-eguzogide rigidity PI: Tenghui VT-901, Arlon 85N, SY S260 (Tg250) | ||||
| High thermal conductivity ihe: 92ML | |||||
| Pure seramiiki ihe: alumina seramiiki, Aluminium nitride ceramik | |||||
| Biotek ihe: Taiwan minanda NGP-200WT | |||||
| n'ígwé | FR4 | 36 | 60 | 140 | |
| Isiike & Flex / (Flex) | 16 （6） | 16 （6） | 24 （6） | ||
| High Frequency Mixed Lamination | 12 | 12 | 20 | ||
| 100% PTFE | 6 | 6 | 10 | ||
| HDI | 2 nzọụkwụ | 3 nzọụkwụ | 4 nzọụkwụ | ||
| Nka na ụzụ Index | Mass ogbe | obere ogbe | sample | ||
| nzipu Size | Max (mm) | 460 * 560 | 460 * 560 | 550 * 900 | |
| (Mm) | Min (mm) | 20 20 | 10 10 | 5 10 | |
| Obosara / Abụọ | Ne (nnù) | 0.5OZ isi ọla kọpa: 3/3 1.0OZ isi ọla kọpa: 4/4 2.0OZ isi ọla kọpa: 5/6 | |||
| 3.0OZ isi ọla kọpa: 7/9 4.0OZ isi ọla kọpa: 8/12 5.0OZ isi ọla kọpa: 10/15 | |||||
| 6.0OZ isi ọla kọpa: 12/18 10 oz isi ọla kọpa: 18/24 12 oz isi ọla kọpa: 20/28 | |||||
| Elu (nnù) | 1 / 3OZ isi ọla kọpa: 3/3 0.5OZ isi ọla kọpa: 4/4 1.0OZ isi ọla kọpa: 5/5 | ||||
| 2.0OZ isi ọla kọpa: 6/8 3.0OZ isi ọla kọpa: 7/10 4.0OZ isi ọla kọpa: 8/13 | |||||
| 5.0OZ isi ọla kọpa: 10/16 6.0OZ isi ọla kọpa: 12/18 10 oz isi ọla kọpa: 18/24 | |||||
| 12 oz isi ọla kọpa: 20/28 15 oz isi ọla kọpa: 24/32 | |||||
| Line Obosara Ndidi | > 5.0 nnù | ± 20% | ± 20% | ± 1.0mil | |
| ≤5.0 nnù | ± 1.0mil | ± 1.0mil | ± 1.0mil | ||
| Mkpọpu ala | Min laser (mm) | 0.1 | 0.1 | 0.1 | |
| Min CNC (mm) | Ugboro abụọ | 0,15 | 0,15 | ||
| Max CNC malite ịgba bit (mm) | 6.5 | 6.5 | 6.5 | ||
| Min Ọkara Oghere (mm) | 0,5 | 0.4 | 0.4 | ||
| PTH Oghere (mm) | nkịtị | ± 0,1 | ± 0,075 | ± 0,075 | |
| ịpị Oghere | ± 0,05 | ± 0,05 | ± 0,05 | ||
| Oghere n'akuku (conical) | Obosara nke elu diameter≤6.5mm: 800,900,1000,1100; obosara nke elu diameter≥6.5mm: 900; | ||||
| Nkenke nke Ịdị Omimi-control Drilling (mm) | ± 0,10 | ± 0,075 | ± 0,05 | ||
| Number nke kpuru ìsì CNC oghere nke otu akụkụ | .2 | .3 | ≤4 | ||
| Kacha nta via oghere spacing (dị iche iche na netwọk, agha, ọgwụ, ụgbọala) mm | 0,5 | 0,45 | 0.4 | ||
| Kacha nta via oghere spacing (dị iche iche na netwọk, general ulo oru akara na n'ji electronic) mm | 0.4 | 0,35 | Ugboro | ||
| Nka na ụzụ index | Mass ogbe | obere ogbe | nlele | ||
| Mkpọpu ala | The kacha nta oghere mgbidi spacing nke n'elu oghere (otu netwọk mm) | Ugboro abụọ | Ugboro abụọ | 0,15 | |
| Kacha nta oghere mgbidi spacing (mm) maka ngwaọrụ oghere | 0,8 | 0,7 | 0,7 | ||
| The kacha nta anya si via onu n'ime ọla kọpa ma ọ bụ akara | Ugboro abụọ | 0,18 | ≤10L: 0,15 | ||
| > 10L: 0,18 | |||||
| The min anya si Device onu n'ime ọla kọpa ma ọ bụ akara | Ugboro | 0,27 | 0,25 | ||
| ịgbado ọkụ Ring | Via oghere | 4 (HDI 3mil) | 3.5 (HDI 3mil) | 3 | |
| (Nnù) | akụrụngwa oghere | 8 | 6 | 6 | |
| Solder oche (nnù) | (Solder nkpuchi) | 5 | 4 | 4 | |
| (Ngwakọ) | 6 | 5 | 5 | ||
| Final Board ọkpụrụkpụ | > 1.0 mm | ± 10% | ± 8% | ± 8% | |
| ≤1.0 mm | ± 0.1mm | ± 0.1mm | ± 0.1mm | ||
| Board ọkpụrụkpụ (mm) | 0.5-5.0 | 0.4-6.5 | 0.3-11.5 | ||
| Board ọkpụrụkpụ / malite ịgba bit | 10:01:00 | 12:01:00 | 13:01:00 | ||
| Via oghere (malite ịgba bit) ikwunye oghere (nkwụnye solder) | 0.25-0.5mm | 0.20-0.5mm | 0.15-0.6mm | ||
| Blind lie onu, onu n'ime mpe mpe akwa | 0.25-0.5mm | 0.20-0.5mm | 0.10-0.6mm | ||
| Bow na ighikota | ≤0.75% | ≤0.75% | 0.5% | ||
| Impedance Control | ≥5.0mil | ± 10% | ± 10% | ± 8% | |
| <5.0mil | ± 10% | ± 10% | ± 10% | ||
| CNC | ngwe ndidi (mm) | ± 0,15 | ± 0,10 | ± 0,10 | |
| V-ịkpụ Ndidi nke mmapụta ọkpụrụkpụ (mm) | ± 0,15 | ± 0,10 | ± 0,10 | ||
| Nsochi usoro oghere (mm) | ± 0,15 | ± 0,10 | ± 0,10 | ||
| Nkenke nke na-achịkwa miri-egwe ọka (mm) | ± 0,15 | ± 0,10 | ± 0,10 | ||
| Nka na ụzụ index | Mass ogbe | obere ogbe | nlele | ||
| ngwe | Bevel ihu | 20 ~ 60 ukwuu; ± 5degree | |||
| n'elu Ọgwụ | imikpu gold | Ni ọkpụrụkpụ (Micro inch) | 118-236 | 118-236 | 118-236 |
| Max gold (uinch) | 3 | 3 | 6 | ||
| Ike gold (Au oké) | Gold mkpịsị aka (uinch) | 15 | 30 | 60 | |
| NiPdAu | Ni (uinch) | 118-236 | |||
| PA (uinch) | 2-5 | ||||
| Au (uinch) | 1-5 | ||||
| Eserese electric gold | Ni (uinch) | 120-400 | |||
| AU (uinch) | 1-3 | ||||
| imikpu tin | Gbamgbam (um) | 0.8-1.2 | |||
| imikpu Ag | Ag (uinch) | 6-10 | |||
| OSP | oké (um) | 0.2-0.5 | |||
| Hal / Hal LF | BGApad (mm) | ≥0.3 × 0.3 | |||
| ọkpụrụkpụ (mm) | 0.6≤H≤3.0 | ||||
| Board ọkpụrụkpụ vs oghere n'obosara | Press hole≤3: 1 | ||||
| Gbamgbam (um) | 2.0-40.0 | ||||
| Isiike & Flex | Oke dielectric ọkpụrụkpụ nke Flex | Mama -free 25um | Mama-free 75um | Mama-free75um | |
| Flex akụkụ obosara (mm) | .10 | 5 | 5 | ||
| Max nnyefe size (mm) | 200 × 400 | 200 × 500 | 400 × 550 | ||
| anya nke via onu onu nke isiike & Flex (mm) | 1.2 | ≥1.0 | .0.8 | ||
| (Mm) anya nke mmiri onu ka onu nke R & F | 1.5 | 1.2 | ≥1.0 | ||
| Nka na ụzụ index | Mass ogbe | obere ogbe | nlele | ||
| Isiike & Flex | Nhazi | The mpụta oyi akwa Ọdịdị nke ahụ Flex akụkụ, ndị PI mkwado Ọdịdị na nkewa Ọdịdị | Aluminum dabeere isiike Flex, isiike Flex HDI, Nchikota, akpa echebe film | ||
| Pụrụ iche Tech | Back-egwu PCB, metal bred, oké ọla kọpa lie ìsì onu, nzọụkwụ oghere, diski onu, ọkara onu, mbuaha lamination | Lie magnetik isi PCB | Lie capacitor / resistor, agbakwunyere ọla kọpa na ele mmadụ anya n'ihu ebe, 100% seramiiki PCB, lie riveting nut PCB, agbakwunyere mmiri PCB | ||
Fast, pụrụ ịdabere na deliveries
Sochie mmepụta usoro na ezigbo oge.
24 awa ngwa turnaround PCB prototype;
Napụta anyị gwara anyị PCB factory gị ụzọ.
Quality Meela ya n'ezie n'ezie
%
Shiping Meela ya n'ezie n'ezie
%