10 vaega Boad auro Ese GS faatofuina | YMS PCB

Electroless limasene po o le faatofuina Auro (99.9 pasene Gold)

　　▪ masani mafiafia o 0,08 μm po 0,000003 inisi e 0.2 μm po 0,000008 inisi auro i 0.5 μm po 0,0002 inisi limasene

　　▪ tetee Silisili mai corrosion

　　▪ talafeagai mo fusia uaea alumini

　　▪ lelei tele mo le faaaogaina o tekinolosi pitch lelei

　　▪ tomai Silisili mo soldering

　　▪ olaga fata Lelei

In PCI and light module, line socket, a large number of use of goldfinger, goldfinger has been divided into: long goldfinger, broken section goldfinger, split goldfinger;

Goldfinger plate in the process of processing, need to pull the gold-plated wire, conventional goldfinger processing process is relatively simple, long and short goldfinger, the goldfinger leads need to be strictly controlled, need to complete the second etching.

It is more difficult to break the section of goldfinger than the length of the goldfinger, requiring dry film 3 times of process, the lead does not remain 4 times to complete the goldfinger production, often 90% of the goldfinger control is unable to process.

YMSPCB processing plug goldfinger and short and short goldfinger, broken section goldfinger, master the core manufacturing technology, single goldfinger gold-plated thickness up to 50U gold, industrial graphics card PCI can be processed to 50U gold;

Gilding is called hard gold. Why does goldfinger need gilding?

Because of the use of graphics card and plug, often circuit board often need to plug, gold-plated is the hardware, plug up to 200,000 times;

Shen jin is software, the number of plug and insert is limited, each plug and insert will reduce the life of goldfinger;

Gold plating is hard gold, in the extraction of gold, gold in the process of extraction of hardness, gold plating in the extraction of excellent performance, conductive performance can improve the efficiency of conduction.

E Ia Fia:

1、What is gold finger in PCB

2、Introduction of gold-plating process of PCB goldfinger

3、Soldered FPC gold finger design tips

4、Introduction to 9 common problems in PCB production