Ċina 10 Saff Boad deheb Għoli Tg immersjoni | YMS fabbrika PCB u l-manifatturi | Yongmingsheng
Merħba għall-websajt tagħna.

10 Saff Boad deheb Għoli Tg immersjoni | YMS PCB

Deskrizzjoni fil-qosor:

Parameters Layers: 10

Materjal Bażi: S1170

Ħxuna: 1.6

Minimu Linja Wisa / Approvazzjoni: 0.10mm / 0.10mm

Daqs: 100mm × 100mm

Aspect Ratio: 16: 1

Trattament tal-wiċċ: ENIG

Crafts Immersion Gold:4“ 2 Step HDI Resin Plug Hole Technology High Frequency Board

Applikazzjonijiet: Komunikazzjoni


Dettall tal-prodott

prodott Tags

Electroless Nikil jew Tgħaddis Deheb (99.9 fil-mija Gold)

  ▪ ħxuna tas-soltu hija 0.08 nm jew 0.000003 pulzier għal 0,2 nm jew 0.000008 deheb pulzier fuq 0.5 nm jew 0.0002 pulzier nikil

  ▪ reżistenza Superjuri mill-korrużjoni

  ▪ adegwat għall-twaħħil tal-wajer tal-aluminju

  ▪ Tajba ħafna għall-użu tat-teknoloġija żift multa

  ▪ kapaċità Superjuri għall-issaldjar

  ▪ shelf life tajba ħafna

In PCI and light module, line socket, a large number of use of goldfinger, goldfinger has been divided into: long goldfinger, broken section goldfinger, split goldfinger;

Goldfinger plate in the process of processing, need to pull the gold-plated wire, conventional goldfinger processing process is relatively simple, long and short goldfinger, the goldfinger leads need to be strictly controlled, need to complete the second etching.

It is more difficult to break the section of goldfinger than the length of the goldfinger, requiring dry film 3 times of process, the lead does not remain 4 times to complete the goldfinger production, often 90% of the goldfinger control is unable to process.

YMSPCB processing plug goldfinger and short and short goldfinger, broken section goldfinger, master the core manufacturing technology, single goldfinger gold-plated thickness up to 50U gold, industrial graphics card PCI can be processed to 50U gold;

Gilding is called hard gold. Why does goldfinger need gilding?

Because of the use of graphics card and plug, often circuit board often need to plug, gold-plated is the hardware, plug up to 200,000 times;

Shen jin is software, the number of plug and insert is limited, each plug and insert will reduce the life of goldfinger;

Gold plating is hard gold, in the extraction of gold, gold in the process of extraction of hardness, gold plating in the extraction of excellent performance, conductive performance can improve the efficiency of conduction.

Tista 'Tħobb:

1、What is gold finger in PCB

2、Introduction of gold-plating process of PCB goldfinger

3、Soldered FPC gold finger design tips

4、Introduction to 9 common problems in PCB production


https://www.ymspcb.com/10-layer-edge-plating-board-yms-pcb-2.html


  • Preċedenti:
  • Li jmiss:

  • Ikteb messaġġ tiegħek hawn u jibagħtu lill magħna
    WhatsApp Online Chat!