High Tg material PCB 6 Layer High Tg Board| YMS PCB

Cur síos achomair:

High TG PCBs have an array of applications, from engines to industrial processes, WiFi boosters, and computer systems. They mitigate the internal damage a machine does to itself when it functions by raising the tolerance of a device to heat, moisture, and chemical corrosion. Not only do they improve functionality, but they also enhance the lifespan of PCBs in general by reducing common issues like short-circuiting. If you are looking to get the best-embedded systems or a high TG PCB monaróir , look no further. You can use YMS technology to design your high TG PCB boards.

paraiméadair

Layers: 6L High Tg FR4 Material Smaointeoireacht an Bhoird: 1.6mm Base Material:EM827 High tg Poill Min: 0.2mm Leithead / Imréiteach Íosta Líne ： 0.075mm / 0.075mm Íos-Imréiteach idir Ciseal Istigh PTH go Líne ： 0.2mm Size：214mm×148mm Cóimheas Treoíochta: 8: 1 Cóireála dromchla: ENIG Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω Applications: Consumer electronics

Seol r-phost chugainn Íoslódáil mar PDF

Sonraigh Táirge

CC

Táirge Clibeanna

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as "Tg", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 High TG material can often provide the best solution.

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Gné	cumais
Líon Sraitheanna	3-60L
Teicneolaíocht PCB Multilayer atá ar fáil	Trí pholl le Cóimheas Gné 16: 1
	adhlactha agus dall trí
	Hibrid	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Tiús	0.3mm-8mm
Leithead agus Spás Íosta líne	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35mm
Méid Druileáilte Min meicniúil	0.15mm (6mil)
Cóimheas Gné le haghaidh trí pholl	16: 1
Críochnaigh Dromchla	HASL, HASL saor ó luaidhe, ENIG, Stáin Tumoideachais, OSP, Airgead Tumoideachais, Méar Óir, Óir Crua Leictreaphlátála, OSP Roghnach ， ENEPIG.etc.
Trí Rogha Líon	Déantar an via a phlátáil agus a líonadh le eapocsa seoltaí nó neamh-seoltaí agus ansin uasteorannú agus plátáil air (VIPPO)
	Copar líonta, airgead líonta
Clárú	± 4mil
Masc solder	Glas, Dearg, Buí, Gorm, Bán, Dubh, Corcra, Neamhlonrach Dubh, Neamhlonrach glas.etc.