High Tg material PCB 6 Layer High Tg Board| YMS PCB

Maikling Paglalarawan:

High TG PCBs have an array of applications, from engines to industrial processes, WiFi boosters, and computer systems. They mitigate the internal damage a machine does to itself when it functions by raising the tolerance of a device to heat, moisture, and chemical corrosion. Not only do they improve functionality, but they also enhance the lifespan of PCBs in general by reducing common issues like short-circuiting. If you are looking to get the best-embedded systems or a high TG PCB tagagawa , look no further. You can use YMS technology to design your high TG PCB boards.

Mga parameter

Layers: 6L High Tg FR4 Material Pag-iisip sa Lupon: 1.6mm Base Material:EM827 High tg Min Mga butas: 0.2mm Minimum na Lapad / clearance ng Line ： 0.075mm / 0.075mm Minimum na Pag-clear sa pagitan ng Inner Layer PTH hanggang sa Line ： 0.2mm Size：214mm×148mm Aspect Ratio: 8: 1 Ibabaw ng paggamot: ENIG Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω Applications: Consumer electronics

Magpadala ng email sa amin I-download bilang PDF

Detalye ng Produkto

Mga Madalas Itanong

produkto Mga Tag

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as "Tg", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 High TG material can often provide the best solution.

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Tampok	mga kakayahan
Bilang ng Layer	3-60L
Magagamit na Teknolohiya ng Multilayer PCB	Sa pamamagitan ng butas na may Aspect Ratio 16: 1
	inilibing at bulag sa pamamagitan ng
	Hybrid	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Kapal	0.3mm-8mm
Minimum na linya ng Lapad at Puwang	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35mm
Min na Laki ng mekanikal na Drilled	0.15mm (6mil)
Aspect Ratio para sa pamamagitan ng butas	16: 1
Tapos na sa Labas	HASL, Lead free HASL, ENIG, Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Gold, Selective OSP, ENEPIG.etc.
Sa pamamagitan ng Pagpipilian ng Punan	Ang via ay pinahiran at pinunan ng alinman sa conductive o non-conductive epoxy pagkatapos ay naka-cap at na-plated over (VIPPO)
	Puno ng tanso, puno ng pilak
Pagpaparehistro	± 4mil
Panghinang Mask	Green, Pula, Dilaw, Asul, Puti, Itim, Lila, Matte Itim, Matte berde. Atbp.