High Tg material PCB 6 Layer High Tg Board| YMS PCB

Mubo nga paghulagway:

High TG PCBs have an array of applications, from engines to industrial processes, WiFi boosters, and computer systems. They mitigate the internal damage a machine does to itself when it functions by raising the tolerance of a device to heat, moisture, and chemical corrosion. Not only do they improve functionality, but they also enhance the lifespan of PCBs in general by reducing common issues like short-circuiting. If you are looking to get the best-embedded systems or a high TG PCB manufacturer , look no further. You can use YMS technology to design your high TG PCB boards.

lantugi

Layers: 6L High Tg FR4 Material Hunahuna sa Board: 1.6mm Base Material:EM827 High tg Min Mga Lungag: 0.2mm Minimum nga gilapdon sa Line / clearance ： 0.075mm / 0.075mm Minimum nga clearance taliwala sa Inner Layer PTH hangtod sa Line ： 0.2mm Size：214mm×148mm Aspeto Ratio: 8: 1 Nawong pagtambal: ENIG Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω Applications: Consumer electronics

Send email kanato Download ingon nga PDF

Detalye Product

FAQ

Mga Tags sa Produkto

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as "Tg", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 High TG material can often provide the best solution.

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Dagway	mga kaarang
Ihap sa Layer	3-60L
Magamit nga Multilayer PCB Technology	Pinaagi sa lungag nga adunay Aspect Ratio 16: 1
	gilubong ug buta pinaagi
	Hybrid	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Kabag-on	0.3mm-8mm
Minimum nga gilapdon ug Luna sa linya	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35mm
Min mekanikal nga Gidak-on nga Gibansay	0.15mm (6mil)
Aspect Ratio alang pinaagi sa lungag	16: 1
Pagtapos sa Ibabaw	NANGHIMO, libre nga Nangulo HASL, ENIG, Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Gold, Selective OSP, ENEPIG.etc.
Pinaagi sa Pagpili sa Pagpuno	Ang via gipalutan ug gipuno sa conductive o non-conductive epoxy pagkahuman gitak-opan ug gipalutan (VIPPO)
	Puno sa tanso, napuno ang pilak
Pagrehistro	± 4mil
Maskara sa Solder	Berde, Pula, Dilaw, Asul, Puti, Itom, Lila, Matte nga Itum, Matte nga berde, ug uban pa.