Welcome to our website.

100% Original China Double Side PCB High Tg Manufacturing

Short Description:

When the glass transition temperature (Tg) is over 170°C, it is referred to as a high Tg material.

Parameters

Layers: 6L High Tg FR4 Material

Board Thinkness:2.0mm

Base Material:S1000-2 High tg

Min Holes:0.2mm

Minimum Line Width/Clearance:0.075mm/0.075mm

Minimum Clearance between Inner Layer PTH to Line: 0.2mm

Size:214mm×98mm

Aspect Ratio:10 : 1

Surface treatment:ENIG+ Gold Finger

Differential impedance 90+8/-8Ω

Process characteristics:  gold finger

Applications: Consumer electronics


Product Detail

Product Tags

Our organization sticks for the principle of “Quality will be the life of your business, and name may be the soul of it” for 100% Original China Double Side PCB High Tg Manufacturing, All products and solutions are manufactured with advanced equipment and strict QC procedures in purchase to ensure top quality. Welcome shoppers new and outdated to speak to us for enterprise cooperation.
Our organization sticks for the principle of “Quality will be the life of your business, and name may be the soul of it” for China Double Side PCB, Pcb, Our team knows well the market demands in different countries, and is capable of supplying suitable quality products and solutions at the best prices to different markets. Our company has already set up a experienced, creative and responsible team to develop clients with the multi-win principle.

What is High-Tg circuit boards (HTg)?

High Tg refers to high heat resistance.Generally, the boards of Tg are over 130 degrees, high Tg is generally greater than 170 degrees, and medium Tg is about greater than 150 degrees. Generally, PCB printed boards with Tg≥170℃ are called high Tg printed boards.

High Tg materials have the following properties:

  • High glass flow temperature value (Tg)
  • High temperature durability
  • Long delamination durability
  • Low Z axis expansion (CTE)

Goldfinger design in PCB

Goldfinger is an electrical interface. The common packaging form and appearance of PCB are as follows. When the appearance and packaging similar to the figure below are seen in the PCB design, the first reaction is to see them on the boardGold finger.

The easier way for goldfinger to judge is to have both the TOP and BOTTOM of the device

PIN device;It will look like the u-slot in the picture below.

When there is a goldfinger on the board, you need to work on the details of the goldfinger.

https://www.ymspcb.com/12layer-hard-gold-hdi-yms-pcb.html

https://www.ymspcb.com/12layer-hard-gold-hdi-yms-pcb.html

Details of goldfinger in PCB:

1) in order to increase the wear resistance of goldfinger, goldfinger usually needs to be plated with hard gold.

2) goldfinger needs chamfering, usually 45°, other angles such as 20°, 30°, etc.

If there is no chamfer in the design, there is a problem.In the figure below, the arrow is 45 degrees

chamfering

https://www.ymspcb.com/12layer-hard-gold-hdi-yms-pcb.html

The 45° chamfering Angle in PCB is shown in the following figure:

hard gold pcb3

3) goldfinger needs to do the whole block of anti-welding window opening treatment, and the PIN does not need to open the steel net;

4) a minimum distance of 14mil from the tip of finger is required for the sink tin and silver welding pads;Recommended design

When the pad is more than 1mm away from the finger position, including the through hole pad;

5) do not coat goldfinger with copper;

Below is a goldfinger design for reference

hard gold pcb4

6) all layers of the inner layer of goldfinger need to be copper whittled, usually with a width of 3mm;

It can be done with half finger and whole finger.In pci-e design, there are also fingers

Remove all copper from the mingoldfinger area;

Goldfinger’s resistance will be low, and cupping (hollowing out under the finger) will reduce it

The impedance difference between the impedance line and the impedance line is also beneficial to ESD.

Suggestion: cut all the copper under the goldfinger welding pad

https://www.ymspcb.com/12layer-hard-gold-hdi-yms-pcb.html

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview

Feature capabilities
Layer Count 3-60L
Available Multilayer PCB Technology Through hole with Aspect Ratio 16:1
buried and blind via
Hybrid High Frequency Material such as RO4350B and FR4 TG 180°Mix  etc.
High Speed Material such as M7NE and FR4 TG 180°Mix   etc.
Thickness 0.3mm-8mm
Minimum line Width and Space 0.05mm/0.05mm(2mil/2mil)
BGA  PITCH 0.35mm
Min mechanical Drilled Size 0.15mm(6mil)
Aspect Ratio for through hole 16:1
Surface Finish HASL, Lead free HASL,ENIG,Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Gold, Selective OSP,ENEPIG.etc.
Via Fill Option The via is plated and filled with either conductive or non-conductive epoxy then capped and plated over(VIPPO)
Copper filled, silver filled
Registration ±4mil
Solder Mask Green, Red, Yellow, Blue, White, Black, Purple, Matte Black, Matte green.etc.

 



https://www.ymspcb.com/6layer-gold-finger-board-yms-pcb.html



  • Previous:
  • Next:

  • Write your message here and send it to us
    WhatsApp Online Chat !