China High Tg PCB Advanced PCB Manufacturing| YMS PCB factory and manufacturers | Yongmingsheng
Byenveni nan sit entènèt nou an.

High Tg PCB Advanced PCB Manufacturing| YMS PCB

Kout Deskripsyon:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs. 

paramèt

Layers: 4L High Tg FR4 Material

Komisyon Konsèy Thinkness: 1.6mm

Base Material:EM827 High tg

Twou Min: 0.2mm

Minimòm Liy Lajè / Clearance : 0.075mm / 0.075mm

Clearance Minimòm ant Inner Kouch PTH Liy : 0.2mm

Size:208mm×148mm

Aspè Pwopòsyon: 8: 1

Surface treatment:Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics


pwodwi Detay

pwodwi baj

How do I classify high-TG materials?

Materyèl TG MOT
FR4-standard-TG 130°C 110°C
FR4-mittel-TG 150°C 130°C
FR4-hoch-TG 170°C 150°C
Polyimid-Super-hoch-TG-Material 250°C 230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance. 

You may apply the following values:

Material type Typical „TG“
CEM1 110-130°C
FR4 120-180°C
PTFE 200-260°C
Ceramic 200-300°C
Polyimide 200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview

Karakteristik kapasite
Kouch Konte 3-60L
Disponib Multikouch PCB Teknoloji Atravè twou ak Pwopòsyon 16: 1
antere ak avèg via
Ibrid High Frequency Material such as RO4350B and FR4 TG 180°Mix  etc.
High Speed Material such as M7NE and FR4 TG 180°Mix   etc.
Epesè 0.3mm-8mm
Minimòm liy lajè ak espas 0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH 0.35mm
Min mekanik gwosè komanse fouye 0.15mm (6mil)
Aspè Pwopòsyon pou nan twou 16: 1
Sifas Fini HASL, plon gratis HASL, ENIG, eten imèsyon, OSP, ajan imèsyon, dwèt lò, galvanoplastie difisil lò, selektif OSP , ENEPIG.etc.
Via Ranpli Opsyon Via a se plake ak plen ak swa konduktif oswa ki pa kondiktif epoksidik Lè sa a, capped ak plake sou (VIPPO)
Kuiv plen, ajan plen
Enskripsyon ± 4mil
Mask soude Vèt, Wouj, Jòn, Blue, Blan, Nwa, Koulè wouj violèt, Matte Nwa, Matte green.etc.

Li plis nouvèl


https://www.ymspcb.com/4layer-high-tg-board.html



  • Previous:
  • Next:

  • Ekri mesaj ou a isit la epi voye li nan nou
    WhatsApp sou entènèt chat!