High Tg PCB Advanced PCB Manufacturing| YMS PCB

Disgrifiad byr:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

paramedrau

Layers: 4L High Tg FR4 Material

Meddwl y Bwrdd: 1.6mm

Base Material:EM827 High tg

Tyllau Min: 0.2mm

Isafswm Lled / Clirio Llinell ： 0.075mm / 0.075mm

Isafswm y Clirio rhwng Haen Fewnol PTH i'r Llinell ： 0.2mm

Size：208mm×148mm

Agwedd Cymhareb: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

Anfon e-bost atom Llwytho i lawr fel PDF

Manylion cynnyrch

cynnyrch Tags

How do I classify high-TG materials?

Deunydd	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Nodwedd	galluoedd
Cyfrif Haen	3-60L
Technoleg PCB Multilayer sydd ar gael	Trwy dwll gyda Chymhareb Agwedd 16: 1
	claddedig a dall trwy
	Hybrid	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Trwch	0.3mm-8mm
Lled a Gofod Isafswm y llinell	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35mm
Maint Drilio Min mecanyddol	0.15mm (6mil)
Cymhareb Agwedd ar gyfer twll drwodd	16: 1
Gorffen Arwyneb	HASL, HASL di-blwm, ENIG, Tun Trochi, OSP, Arian Trochi, Bys Aur, Aur Caled Electroplatio, OSP Dewisol ， ENEPIG.etc.
Trwy Opsiwn Llenwi	Mae'r via yn cael ei blatio a'i lenwi â naill ai epocsi dargludol neu an-ddargludol yna wedi'i gapio a'i blatio drosodd (VIPPO)
	Copr wedi'i lenwi, wedi'i lenwi ag arian
Cofrestru	± 4mil
Mwgwd solder	Gwyrdd, Coch, Melyn, Glas, Gwyn, Du, Porffor, Du Matte, Matte green.etc.