High Tg PCB Advanced PCB Manufacturing| YMS PCB

Kufotokozera Kwachidule:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

magawo

Layers: 4L High Tg FR4 Material

Kuganiza Kwabungwe: 1.6mm

Base Material:EM827 High tg

Min Mabowo: 0.2mm

Kuchuluka kwa Mzere Wocheperako / Kutsegula: 0.075mm / 0.075mm

Kutsika kocheperako pakati pa Gulu Lamkati PTH ndi Mzere: 0.2mm

Size：208mm×148mm

Makulidwe: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

Tumizani imelo kwa ife Download monga PDF

mankhwala Mwatsatanetsatane

Tags mankhwala

How do I classify high-TG materials?

Zakuthupi	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Mbali	mphamvu
Chiwerengero Chosanjikiza	3-60L
Likupezeka Multilayer PCB Technology	Kupyola mu dzenje ndi mawonekedwe Ratio 16: 1
	kuyikidwa ndi khungu kudzera
	Zophatikiza	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Makulidwe	0.3-8mm
Kutalika kochepera kwa mzere ndi Space	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35 mm
Min makina mokhomerera Kukula	0.15mm (6mil)
Ziwerengero Zazolowera zoboola	16: 1
Pamwamba kumaliza	HASL, Mtsogoleri waulere HASL, ENIG, Kumiza Tin, OSP, Kumiza Siliva, Chala Chagolide, Electroplating Hard Gold, Selective OSP ， ENEPIG.etc.
Kudzera Kudzaza Njira	Njirayo imadzazidwa ndikudzazidwa ndi epoxy yoyendetsa kapena yosakhazikika kenako yophimbidwa ndikuphimbidwa (VIPPO)
	Mkuwa wodzazidwa, wodzazidwa ndi siliva
Kulembetsa	± 4mil
Solder Chigoba	Green, Red, Yellow, Blue, White, Black, Pepo, Matte Black, Matte wobiriwira.etc.