High Tg PCB Advanced PCB Manufacturing| YMS PCB

Famaritana fohy:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

masontsivana

Layers: 4L High Tg FR4 Material

Fieritreretan'ny birao: 1.6mm

Base Material:EM827 High tg

Lavaka Min: 0.2mm

Ny sakany farany ambany / fahazoana: 0.075mm / 0.075mm

Fahazavana kely indrindra eo anelanelan'ny PTH anatiny ka hatramin'ny laharana ： 0.2mm

Size：208mm×148mm

Aspect ratio: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

Alefaso mailaka ho antsika Litera

Product Detail

Tags vokatra

How do I classify high-TG materials?

ara-nofo	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
endri-javatra	fahaiza-manao
Isan'ny sosona	3-60L
Misy Multilayer PCB Technology	Amin'ny alàlan'ny lavaka miaraka amin'ny Aspect Ratio 16: 1
	nalevina ary jamba via
	mifangaro	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
hateviny	0.3mm-8mm
Tsipika faran'ny ambany sy habakabaka	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0,35 mm
Min mekanika namboarina habe	0.15mm (6mil)
Aspect Ratio amin'ny alàlan'ny lavaka	16: 1
Vita ny etona	HASL, HASL maimaim-poana, ENIG, firoboka ao anaty rano, OSP, volom-boaloboka, rantsantanana volamena, volamena mafy elektrika, OSP voafantina, ENEPIG.etc.
Amin'ny alàlan'ny Safidy famenoana	Ny via dia nopetahany takelaka ary nofenoina epoxy conductive na tsy conductive avy eo notapenana sy nopetahana (VIPPO)
	Fenoy varahina, feno volafotsy
fisoratana anarana	± 4mil
Saron-tava solder	Green, Red, Yellow, Blue, White, Black, Purple, Matte Black, Matte green.