High Tg PCB Advanced PCB Manufacturing| YMS PCB

ລາຍລະອຽດສັ້ນ:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

ພາລາມິເຕີ

Layers: 4L High Tg FR4 Material

ຄວາມຄິດຂອງກະດານ: 1.6 ມມ

Base Material:EM827 High tg

ຮູຂຸມຂົນນ້ອຍ: 0.2mm

ຄວາມກວ້າງ / ຄວາມສະອາດຕ່ ຳ ສຸດ： 0.075mm / 0.075mm

ການລ້າງຂັ້ນຕ່ ຳ ລະຫວ່າງຊັ້ນໃນ PTH ເຖິງເສັ້ນ to 0.2mm

Size：208mm×148mm

ອັດຕາສ່ວນລັກສະນະ: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

ສົ່ງອີເມລ໌ໃຫ້ພວກເຮົາ ດາວໂຫລດເປັນ PDF

ລາຍລະອຽດຜະລິດຕະພັນ

Tags ຜະລິດຕະພັນ

How do I classify high-TG materials?

ວັດສະດຸ	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
ຄຸນນະສົມບັດ	ຄວາມສາມາດ
ຈຳ ນວນຊັ້ນ	3-60L
ສາມາດໃຊ້ໄດ້ກັບ Multilayer PCB Technology	ຜ່ານຂຸມກັບ Aspect Ratio 16: 1
	ຝັງແລະຕາບອດຜ່ານ
	ປະສົມ	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
ຄວາມ ໜາ	ຂະ ໜາດ 0.3mm-8mm
ເສັ້ນຄວາມກວ້າງແລະຊ່ອງນ້ອຍສຸດ	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	ຂະ ໜາດ 0.35mm
ຂະ ໜາດ ເຈາະກົນຈັກ ໜ້ອຍ	0.15mm (6mil)
ອັດຕາສ່ວນ ສຳ ລັບຜ່ານຮູ	16: 1, ລ. ມ
ດ້ານ ສຳ ເລັດຮູບ	HASL, Lead free HASL, ENIG, Immersion Tin, OSP, ເງິນດູດຊຶມ, ນິ້ວມື ຄຳ, Electroplating ຄຳ ແຂງ, ຄຳ ທີ່ເລືອກ OSP， ENEPIG.etc
ຜ່ານ Option Option	ທາງຜ່ານແມ່ນຖືກຈັດໃສ່ແລະເຕັມໄປດ້ວຍ epoxy ທີ່ບໍ່ສາມາດປະຕິບັດໄດ້ຫຼືບໍ່ແມ່ນການປະພຶດ.
	ທອງແດງທີ່ເຕັມໄປ, ເງິນເຕັມໄປ
ການລົງທະບຽນ	± 4mil
ຫນ້າກາກ Solder	ສີຂຽວ, ສີແດງ, ສີເຫຼືອງ, ສີຟ້າ, ສີຂາວ, ສີ ດຳ, ສີມ່ວງ, ສີດໍາ Matte, Matte green.etc.