High Tg PCB Advanced PCB Manufacturing| YMS PCB

Goirid Tuairisgeul:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

Chrìochan

Layers: 4L High Tg FR4 Material

Beachd-bùird: 1.6mm

Base Material:EM827 High tg

Mion tuill: 0.2mm

Leud / glanadh loidhne as ìsle ： 0.075mm / 0.075mm

Glanadh as ìsle eadar PTH Sreath a-staigh gu Loidhne ： 0.2mm

Size：208mm×148mm

Cuspair Ratio: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

Cuir post-d thugainn Luchdaich a-nuas mar PDF

bathar Detail

bathar Tags

How do I classify high-TG materials?

Stuth	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Feart	comasan
Cunntas sreathan	3-60L
Teicneòlas PCB Multilayer ri fhaighinn	Tro tholl le Co-mheas Gnìomh 16: 1
	adhlaicte agus dall via
	Hibrid	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Tiugh	0.3mm-8mm
Leud is àite as ìsle	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35mm
Meud drile meacanaigeach	0.15mm (6mil)
Co-mheas Aspect airson tro tholl	16: 1
Crìoch uachdar	HASL, HASL luaidhe an-asgaidh, ENIG, Tun bogaidh, OSP, Airgead bogaidh, meur òir, òr cruaidh dealanach, OSP roghnach ， ENEPIG.etc.
Tro Roghainn Lìon	Tha an via air a phlàstadh agus air a lìonadh le epoxy seoltach no neo-ghiùlain agus an uairsin air a ribeadh agus a chur thairis (VIPPO)
	Copar air a lìonadh, airgead air a lìonadh
Clàradh	± 4mil
Measg solder	Uaine, dearg, buidhe, gorm, geal, dubh, purpaidh, dubh dubh, uaine matte.etc.