China High Tg PCB Advanced PCB Manufacturing| YMS PCB factory and manufacturers | Yongmingsheng
በእኛ ድረገጽ እንኳን ደህና መጡ.

High Tg PCB Advanced PCB Manufacturing| YMS PCB

አጭር መግለጫ:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs. 

መለኪያዎች

Layers: 4L High Tg FR4 Material

የቦርድ አስተሳሰብ: 1.6 ሚሜ

Base Material:EM827 High tg

የማዕድን ጉድጓድ ቀዳዳዎች: 0.2 ሚሜ

አነስተኛ የመስመር ስፋት / ማጣሪያ Cle 0.075mm / 0.075mm

በውስጠኛው ንብርብር PTH እስከ መስመር : 0.2 ሚሜ መካከል አነስተኛ ማጣሪያ

Size:208mm×148mm

ገጽታ ሬሾ: 8: 1

Surface treatment:Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics


የምርት ዝርዝር

የምርት መለያዎች

How do I classify high-TG materials?

ቁሳቁስ TG MOT
FR4-standard-TG 130°C 110°C
FR4-mittel-TG 150°C 130°C
FR4-hoch-TG 170°C 150°C
Polyimid-Super-hoch-TG-Material 250°C 230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance. 

You may apply the following values:

Material type Typical „TG“
CEM1 110-130°C
FR4 እ.ኤ.አ. 120-180°C
PTFE 200-260°C
Ceramic 200-300°C
Polyimide 200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview

ባህሪ ችሎታዎች
የንብርብር ቆጠራ 3-60 ሊ
ይገኛል ሁለገብ ፒ.ሲ.ቢ. ቴክኖሎጂ ከፕሬስ ሬሾ 16: 1 ጋር ባለው ቀዳዳ በኩል
የተቀበረ እና ዕውር በኩል
ድቅል High Frequency Material such as RO4350B and FR4 TG 180°Mix  etc.
High Speed Material such as M7NE and FR4 TG 180°Mix   etc.
ውፍረት 0.3 ሚሜ -8 ሚሜ
አነስተኛ መስመር ስፋት እና ክፍተት 0.05 ሚሜ / 0.05 ሚሜ (2 ሚሊል / 2 ሚሜ)
ቢ.ጂ. ፒች 0.35 ሚሜ
ደቂቃ ሜካኒካዊ ቁፋሮ መጠን 0.15 ሚሜ (6 ሚሜ)
ቀዳዳ በኩል ለማግኘት ምጥጥነ ገጽታ 16 1
የገጽ ማጠናቀቂያ HASL ፣ መሪ ነፃ HASL ፣ ENIG ፣ ማጥመጃ ቲን ፣ ኦኤስፒ ፣ ጠላቂ ብር ፣ የወርቅ ጣት ፣ ኤሌክትሪክ ሀርድ ወርቅን በኤሌክትሪክ መመንጨት ፣ መራጭ OSP , ENEPIG.etc.
በአማራጭ መሙላት በኩል መተላለፊያው ተሞልቶ በሚሠራው ወይም በማያስተላልፍ ኢፖክ ተሞልቶ ከዚያ ተሸፍኖ ተሸፍኗል (ቪአይፒኦ)
መዳብ ተሞልቶ ፣ ብር ተሞልቷል
ምዝገባ ± 4 ሚል
የሶልደር ማስክ አረንጓዴ ፣ ቀይ ፣ ቢጫ ፣ ሰማያዊ ፣ ነጭ ፣ ጥቁር ፣ ሐምራዊ ፣ ደብዛዛ ጥቁር ፣ አረንጓዴ አረንጓዴ ወዘተ.

ተጨማሪ ዜና ያንብቡ


https://www.ymspcb.com/4layer-high-tg-board.html



  • የቀድሞው:
  • ቀጣይ:

  • እዚህ መልዕክት ይጻፉ እና ለእኛ ይላኩት
    WhatsApp የመስመር ላይ የውይይት!