High Tg PCB Advanced PCB Manufacturing| YMS PCB

Kukuru Apejuwe:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

sile

Layers: 4L High Tg FR4 Material

Igbimọ ironu: 1.6mm

Base Material:EM827 High tg

Awọn Iho Min: 0.2mm

Iwọn Iwọn Iwọn / Kiliaran ： 0.075mm / 0.075mm

Iyatọ Kere laarin Layer Inu PTH si Laini ： 0.2mm

Size：208mm×148mm

Aspect ratio: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

Fi imeeli ranṣẹ si wa Gba bi PDF

ọja Apejuwe

ọja Tags

How do I classify high-TG materials?

Ohun elo	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Ẹya	awọn agbara
Ika Layer	3-60L
Imọ-ẹrọ PCB Multilayer ti o wa	Nipasẹ iho pẹlu Asọye Oṣuwọn 16: 1
	sin ati afọju nipasẹ
	Arabara	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Sisanra	0.3mm-8mm
Iwọn ati Iwọn ila kekere	0.05mm / 0.05mm (2mil / 2mil)
BGA Agbo	0.35mm
Min darí ti gbẹ iho Iwon	0.15mm (6mil)
Ipele Ipele fun nipasẹ iho	16: 1
Ipari dada	HASL, Ṣiṣakoso HASL, ENIG, Tin immersion, OSP, Fadaka Imimimọ, Ika Goolu, Itanna Gold Giladi, Aṣayan OSP ， ENEPIG.etc.
Nipasẹ Kun Aṣayan	Ti firanṣẹ nipasẹ ati ti o kun pẹlu boya ifọnọhan tabi iposii ti kii ṣe ifọnọhan lẹhinna tan ati ki o fi sii lori (VIPPO)
	Ejò kun, fadaka kun
Iforukọsilẹ	M 4mil
Boju Solder	Green, Red, Yellow, Blue, White, Black, Purple, Black Matte, Matte green.etc.