China Double sided pcb Normal pcb Lead free HASL Counterbore Manufacturer | YMS PCB factory and manufacturers | Yongmingsheng
Bizim veb səhifəsinə xoş gəlmisiniz.

Double sided pcb Normal pcb Lead free HASL Counterbore Manufacturer | YMS PCB

Qısa Təsvir:

The typical thickness of HAL(Lead Free) is 1-40um and the shelf life is 12 months.

YMSPCB is a professional PCBwholesale manufacturer, providing turnkey service for all types of PCB manufacturing and PCB assembly.

Parameters

Layers: 2 Double sided PCB

Qalınlıq: 1.6mm

Əsas material: S1150G Halojensiz

Mininum delik ölçüsü: 0.2mm

Minimum Line Eni / Satış: 0.15mm / 0.15mm

Ölçü: 480mm × 450mm

Aspect nisbəti: 8: 1

Surface treatment:Lead free HASL

xüsusi technique: Counterbore

Applications: Main Board / Elektronika

 


Product Ətraflı

Məhsul etiketləri

HAL(Lead Free), the full name is Hot Air leveling with Lead Free. Compared with HASL, the main difference for HAL(Lead Free) is the element of material which do not contain Lead(Pb), so it’s RoHS Compliant and it’s much more popular and widely used in PCB istehsal .

HAL(Lead Free) requires higher run temperatures for lead free solder and longer contact time, the production cost for HAL(Lead Free) is slightly higher than HASL(Tin/Lead).

The manufacturing process of HAL(Lead Free) is similar to HASL(Tin/Lead), the circuit boards will be submersed in molten solder(Lead Free). This solder will cover all the exposed copper surfaces. Upon retraction from the solder, high pressure hot air is blown over the surface through air knives, this levels the solder deposit and removes the excess solder from the surface of printed circuit boards.

Printed Circuit Board Giriş

Normal çap dövrə lövhəsi: Most PCBs for simple electronics are simple and composed of only a single layer. More sophisticated hardware such as computer graphics cards or motherboards can have 2 or multiple layers, sometimes up to twelve.

A printed circuit board (PCB) mechanically supports and electrically connects electrical or electronic components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. Components are generally soldered onto the PCB to both electrically connect and mechanically fasten them to it.PCBs can be single-sided (one copper layer), double-sided (two copper layers on both sides of one substrate layer), or multi-layer (outer and inner layers of copper, alternating with layers of substrate). Multi-layer PCBs allow for much higher component density, because circuit traces on the inner layers would otherwise take up surface space between components. The rise in popularity of multilayer PCBs with more than two, and especially with more than four, copper planes was concurrent with the adoption of surface mount technology.

PCB tipləri YMSPCB

 What is the difference between a Countersink and a Counterbore?

Counterbore və Countersink

YMS Normal PCB istehsal imkanları:

YMS Normal PCB istehsal imkanlarına ümumi baxış
Xüsusiyyət imkanları
Layer sayı 1-60 l
Mövcud Normal PCB Texnologiyası Ənənə nisbəti 16: 1 olan çuxurdan
basdırılmış və kor
Hibrid RO4350B və FR4 Mix və s. Kimi yüksək tezlikli material
M7NE və FR4 Mix və s. Kimi yüksək sürətli material.
Material CEM- CEM-1; CEM-2, CEM-4, CEM-5. və s
FR4 EM827, 370HR, S1000-2, IT180A, IT158, S1000 / S1155, R1566W, EM285, TU862HF, NP170G və s.
Yüksək sürət Megtron6, Megtron4, Megtron7, TU872SLK, FR408HR, N4000-13 Series, MW4000, MW2000, TU933 və s.
Yüksək tezlikli Ro3003, Ro3006, Ro4350B, Ro4360G2, Ro4835, CLTE, Genclad, RF35, FastRise27 və s.
Digərləri Polyimide, Tk, LCP, BT, C-ply, Fradflex, Omega, ZBC2000, PEEK, PTFE, keramika əsaslı və s.
Qalınlıq 0,3 mm-8 mm
Maksimum mis qalınlığı 10 OZ
Minimum sətir genişliyi və boşluğu 0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH 0.35 mm
Min mexaniki qazılmış ölçü 0,15 mm (6 mil)
Çuxurdan keçid nisbəti 16: 1
Səthi bitirmək HASL, Qurğuşunsuz HASL, ENIG, Daldırma Qalay, OSP, Daldırma Gümüş, Qızıl Barmaq, Elektrokaplama Sərt Qızıl, Seçməli OSP , ENEPIG.etc.
Doldurma Seçimi ilə Vasitəsilə örtülür və ya keçirici və ya keçirici olmayan epoksi ilə doldurulur və sonra örtülür və örtülür (VIPPO)
Mis dolu, gümüş dolmuş
Qeydiyyat ± 4 mil
Lehim Maska Yaşıl, Qırmızı, Sarı, Mavi, Ağ, Qara, Bənövşəyi, Tutqun Qara, Tutqun yaşıl. Və s.

Bəyənə bilərsiniz:

1, Summary of matters needing attention in circuit board welding

2, Countersink Hole PCB

3, What is PCB

4Çılpaq taxta testi nədir?

5.  Yüksək tezlikli PCB dizaynı nədir

6. PCB-də mis qalınlığı nədir

7. What is a 6 layers PCB

YMS məhsulları haqqında daha çox məlumat əldə edin


https://www.ymspcb.com/2-layer-immersion-gold-board-yms-pcb.html

https://www.ymspcb.com/2-layer-immersion-gold-board-yms-pcb.html


  • Əvvəlki:
  • Next:

  • Mesajınızı buraya yazın və bizə göndərin
    WhatsApp Online Chat!