Double sided pcb Normal pcb Lead free HASL Counterbore Manufacturer | YMS PCB
HAL(Lead Free), the full name is Hot Air leveling with Lead Free. Compared with HASL, the main difference for HAL(Lead Free) is the element of material which do not contain Lead(Pb), so it’s RoHS Compliant and it’s much more popular and widely used in proizvodnih .
HAL(Lead Free) requires higher run temperatures for lead free solder and longer contact time, the production cost for HAL(Lead Free) is slightly higher than HASL(Tin/Lead).
The manufacturing process of HAL(Lead Free) is similar to HASL(Tin/Lead), the circuit boards will be submersed in molten solder(Lead Free). This solder will cover all the exposed copper surfaces. Upon retraction from the solder, high pressure hot air is blown over the surface through air knives, this levels the solder deposit and removes the excess solder from the surface of printed circuit boards.
Uvod tiskanih pločica
Normalna štampana ploča: Most PCBs for simple electronics are simple and composed of only a single layer. More sophisticated hardware such as computer graphics cards or motherboards can have 2 or multiple layers, sometimes up to twelve.
A printed circuit board (PCB) mechanically supports and electrically connects electrical or electronic components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. Components are generally soldered onto the PCB to both electrically connect and mechanically fasten them to it.PCBs can be single-sided (one copper layer), double-sided (two copper layers on both sides of one substrate layer), or multi-layer (outer and inner layers of copper, alternating with layers of substrate). Multi-layer PCBs allow for much higher component density, because circuit traces on the inner layers would otherwise take up surface space between components. The rise in popularity of multilayer PCBs with more than two, and especially with more than four, copper planes was concurrent with the adoption of surface mount technology.
What is the difference between a Countersink and a Counterbore?
YMS Normalne proizvodne mogućnosti PCB-a:
| Pregled mogućnosti proizvodnje normalne PCB YMS | ||
| Feature | mogućnosti | |
| Broj slojeva | 1-60L | |
| Dostupna normalna PCB tehnologija | Prolazna rupa s omjerom 16: 1 | |
| pokopan i slijep | ||
| Hibrid | Visokofrekventni materijali poput RO4350B i FR4 Mix itd. | |
| Materijal za velike brzine kao što su M7NE i FR4 Mix itd. | ||
| Materijal | CEM- | CEM-1; CEM-2 ； CEM-4 ； CEM-5.itd |
| FR4 | EM827, 370HR, S1000-2, IT180A, IT158, S1000 / S1155, R1566W, EM285, TU862HF, NP170G itd. | |
| Velika brzina | Megtron6, Megtron4, Megtron7, TU872SLK, FR408HR, serije N4000-13, MW4000, MW2000, TU933 itd. | |
| Visoka frekvencija | Ro3003, Ro3006, Ro4350B, Ro4360G2, Ro4835, CLTE, Genclad, RF35, FastRise27 itd. | |
| Ostali | Poliimid, Tk, LCP, BT, C-sloj, Fradflex, Omega, ZBC2000, PEEK, PTFE, na bazi keramike itd. | |
| Debljina | 0,3mm-8mm | |
| Maks. Debljina bakra | 10OZ | |
| Minimalna širina linije i razmak | 0,05 mm / 0,05 mm (2 mil. / 2 mil.) | |
| BGA PITCH | 0,35 mm | |
| Minimalna mehanička veličina bušenja | 0,15 mm (6 mil.) | |
| Omjer slike za prolaznu rupu | 16: 1 | |
| Površinska obrada | HASL, bezolovni HASL, ENIG, potopljeni lim, OSP, uronjeno srebro, zlatni prst, galvansko tvrdo zlato, selektivni OSP ， ENEPIG.itd. | |
| Putem opcije popunjavanja | Prolaz je presvučen i ispunjen provodljivim ili neprovodljivim epoksidom, zatim zatvoren i prevučen (VIPPO) | |
| Punjeno bakrom, srebrom | ||
| Registracija | ± 4mil | |
| Maska za lemljenje | Zelena, crvena, žuta, plava, bijela, crna, ljubičasta, mat crna, mat zelena.itd. | |
Može vam se svidjeti:
1、Summary of matters needing attention in circuit board welding
4、Šta je ispitivanje gole ploče?
5. Što je visokofrekventni PCB dizajn
Saznajte više o YMS proizvodima
