China Double sided pcb Normal pcb Lead free HASL Counterbore Manufacturer | YMS PCB factory and manufacturers | Yongmingsheng
ਸਾਡੀ ਵੈੱਬਸਾਈਟ ਨੂੰ ਸਵਾਗਤ ਹੈ.

Double sided pcb Normal pcb Lead free HASL Counterbore Manufacturer | YMS PCB

ਛੋਟੇ ਵੇਰਵਾ:

The typical thickness of HAL(Lead Free) is 1-40um and the shelf life is 12 months.

YMSPCB is a professional PCBwholesale manufacturer, providing turnkey service for all types of PCB manufacturing and PCB assembly.

ਪੈਰਾਮੀਟਰ

Layers: 2 Double sided PCB

ਮੋਟਾਈ: 1.6 ਮਿਲੀਮੀਟਰ

ਅਧਾਰ ਸਮਗਰੀ: ਐਸ 1150 ਜੀ ਹੈਲੋਜਨ ਮੁਕਤ

ਮਿਨੀਨਮ ਹੋਲ ਦਾ ਆਕਾਰ : 0.2mm

ਘੱਟੋ-ਘੱਟ ਲਾਈਨ ਚੌੜਾਈ / ਝੰਡੀ: 0.15mm / 0.15mm

ਆਕਾਰ: 480mm × 450mm

ਆਕਾਰ ਅਨੁਪਾਤ: 8: 1

Surface treatment:Lead free HASL

ਵਿਸ਼ੇਸ਼ technique: Counterbore

ਕਾਰਜ: ਮੁੱਖ ਬੋਰਡ / ਖਪਤਕਾਰ ਇਲੈਕਟ੍ਰੋਨਿਕਸ

 


ਉਤਪਾਦ ਵੇਰਵਾ

ਉਤਪਾਦ ਟੈਗਸ

HAL(Lead Free), the full name is Hot Air leveling with Lead Free. Compared with HASL, the main difference for HAL(Lead Free) is the element of material which do not contain Lead(Pb), so it’s RoHS Compliant and it’s much more popular and widely used in ਪੀਸੀਬੀ ਨਿਰਮਾਣ .

HAL(Lead Free) requires higher run temperatures for lead free solder and longer contact time, the production cost for HAL(Lead Free) is slightly higher than HASL(Tin/Lead).

The manufacturing process of HAL(Lead Free) is similar to HASL(Tin/Lead), the circuit boards will be submersed in molten solder(Lead Free). This solder will cover all the exposed copper surfaces. Upon retraction from the solder, high pressure hot air is blown over the surface through air knives, this levels the solder deposit and removes the excess solder from the surface of printed circuit boards.

ਪ੍ਰਿੰਟਿਡ ਸਰਕਟ ਬੋਰਡ ਜਾਣ ਪਛਾਣ

ਸਧਾਰਣ ਪ੍ਰਿੰਟਿਡ ਸਰਕਟ ਬੋਰਡ: Most PCBs for simple electronics are simple and composed of only a single layer. More sophisticated hardware such as computer graphics cards or motherboards can have 2 or multiple layers, sometimes up to twelve.

A printed circuit board (PCB) mechanically supports and electrically connects electrical or electronic components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. Components are generally soldered onto the PCB to both electrically connect and mechanically fasten them to it.PCBs can be single-sided (one copper layer), double-sided (two copper layers on both sides of one substrate layer), or multi-layer (outer and inner layers of copper, alternating with layers of substrate). Multi-layer PCBs allow for much higher component density, because circuit traces on the inner layers would otherwise take up surface space between components. The rise in popularity of multilayer PCBs with more than two, and especially with more than four, copper planes was concurrent with the adoption of surface mount technology.

ਕਿਸਮਾਂ ਦੀਆਂ ਕਿਸਮਾਂ- PCB YMSPCB

 What is the difference between a Countersink and a Counterbore?

ਕਾerਂਟਰਬੋਰ ਅਤੇ ਕਾersਂਟਰਸਿੰਕ

ਵਾਈਐਮਐਸ ਸਧਾਰਣ ਪੀਸੀਬੀ ਨਿਰਮਾਣ ਸਮਰੱਥਾ:

ਵਾਈਐਮਐਸ ਸਧਾਰਣ ਪੀਸੀਬੀ ਨਿਰਮਾਣ ਯੋਗਤਾਵਾਂ ਦੀ ਸੰਖੇਪ ਜਾਣਕਾਰੀ
ਫੀਚਰ ਸਮਰੱਥਾ
ਪਰਤ ਗਿਣਤੀ 1-60 ਲੀ
ਉਪਲਬਧ ਸਧਾਰਣ ਪੀਸੀਬੀ ਤਕਨਾਲੋਜੀ ਪਹਿਲੂ ਦੇ ਅਨੁਪਾਤ 16: 1 ਦੇ ਨਾਲ ਮੋਰੀ ਦੁਆਰਾ
ਦਫਨਾਇਆ ਅਤੇ ਅੰਨ੍ਹੇ ਦੁਆਰਾ
ਹਾਈਬ੍ਰਿਡ ਉੱਚ ਬਾਰੰਬਾਰਤਾ ਪਦਾਰਥ ਜਿਵੇਂ ਕਿ ਆਰਓ 4350 ਬੀ ਅਤੇ ਐਫਆਰ 4 ਮਿਕਸ ਆਦਿ.
ਹਾਈ ਸਪੀਡ ਪਦਾਰਥ ਜਿਵੇਂ ਕਿ ਐਮ 7 ਐਨ ਅਤੇ ਐੱਫ ਆਰ 4 ਮਿਕਸ ਆਦਿ.
ਪਦਾਰਥ ਸੀਈਐਮ- ਸੀ.ਈ.ਐੱਮ.-1; ਸੀ.ਈ.ਐੱਮ.-2 ; ਸੀ.ਈ.ਐੱਮ.-4 ; ਸੀ.ਈ.ਐੱਮ
FR4 EM827, 370HR, S1000-2, IT180A, IT158, S1000 / S1155, R1566W, EM285, TU862HF, NP170G ਆਦਿ.
ਉੱਚ ਰਫ਼ਤਾਰ Megtron6, Megtron4, Megtron7, TU872SLK, FR408HR, N4000-13 ਸੀਰੀਜ਼, MW4000, MW2000, TU933 ਆਦਿ.
ਹਾਈ ਦਾ ਵਕਫ਼ਾ Ro3003, Ro3006, Ro4350B, Ro4360G2, Ro4835, CLTE, Genclad, RF35, FastRise27 ਆਦਿ.
ਹੋਰ ਪੋਲੀਮਾਈਡ, ਟਾਕ, ਐਲਸੀਪੀ, ਬੀਟੀ, ਸੀ-ਪਲਾਈ, ਫਰੈਡਫਲੇਕਸ, ਓਮੇਗਾ, ਜ਼ੈੱਡ ਬੀ ਸੀ 2000, ਪੀਈਈਕੇ, ਪੀਟੀਐਫਈ, ਵਸਰਾਵਿਕ ਅਧਾਰਤ ਆਦਿ.
ਮੋਟਾਈ 0.3mm-8mm
ਮੈਕਸ ਕੋਪਰ ਮੋਟਾਈ 10 ਓਜ਼
ਘੱਟੋ ਘੱਟ ਲਾਈਨ ਚੌੜਾਈ ਅਤੇ ਸਪੇਸ 0.05 ਮਿਲੀਮੀਟਰ / 0.05 ਮਿਲੀਮੀਟਰ (2 ਮਿਲੀਲੀ / 2 ਮਿਲੀ)
ਬੀਜੀਏ ਪਿੱਚ 0.35 ਮਿਲੀਮੀਟਰ
ਘੱਟੋ ਘੱਟ ਮਕੈਨੀਕਲ ਡ੍ਰਿਲਡ ਅਕਾਰ 0.15 ਮਿਲੀਮੀਟਰ (6 ਮੀਲ)
ਮੋਰੀ ਦੁਆਰਾ ਅਨੁਪਾਤ ਦਾ ਅਨੁਪਾਤ 16. 1
ਸਤਹ ਮੁਕੰਮਲ ਐਚਐਸਐਲ, ਲੀਡ ਫ੍ਰੀ ਐਚਐਸਐਲ, ਏਆਈਐਨਜੀ, ਡੁੱਬਣ ਟੀਨ, ਓਐਸਪੀ, ਡੁੱਬਣ ਸਿਲਵਰ, ਗੋਲਡ ਫਿੰਗਰ, ਇਲੈਕਟ੍ਰੋਪਲੇਟਿੰਗ ਹਾਰਡ ਗੋਲਡ, ਸਿਲੈਕਟਿਵ ਓਐਸਪੀ , ENEPIG.etc.
ਭਰਨ ਦੀ ਚੋਣ ਦੁਆਰਾ ਦੁਆਰਾ ਪਲੇਟ ਕੀਤਾ ਜਾਂਦਾ ਹੈ ਅਤੇ ਜਾਂ ਤਾਂ ਕੰਡਕਟਿਵ ਜਾਂ ਗੈਰ-ਸੰਚਾਰਕ ਈਪੌਕਸੀ ਨਾਲ ਭਰਿਆ ਹੁੰਦਾ ਹੈ ਫਿਰ ਕੈਪਡ ਅਤੇ ਪਲੇਟ ਓਵਰ (ਵੀਆਈਪੀਪੀਓ)
ਤਾਂਬੇ ਭਰੇ, ਚਾਂਦੀ ਭਰੀ
ਰਜਿਸਟ੍ਰੇਸ਼ਨ M 4 ਮਿਲੀਅਨ
ਸੋਲਡਰ ਮਾਸਕ ਹਰੇ, ਲਾਲ, ਪੀਲੇ, ਨੀਲੇ, ਚਿੱਟੇ, ਕਾਲੇ, ਜਾਮਨੀ, ਮੈਟ ਬਲੈਕ, ਮੈਟ ਗ੍ਰੀਨ.ਟੈਕ.

ਤੁਸੀਂ ਪਸੰਦ ਕਰ ਸਕਦੇ ਹੋ:

1, Summary of matters needing attention in circuit board welding

2, Countersink Hole PCB

3, What is PCB

4ਬੇਅਰ ਬੋਰਡ ਟੈਸਟਿੰਗ ਕੀ ਹੈ?

5.  ਉੱਚ ਬਾਰੰਬਾਰਤਾ ਪੀਸੀਬੀ ਡਿਜ਼ਾਈਨ ਕੀ ਹੈ

6. ਪੀਸੀਬੀ ਵਿੱਚ ਤਾਂਬੇ ਦੀ ਮੋਟਾਈ ਕੀ ਹੈ

7. What is a 6 layers PCB

ਵਾਈਐਮਐਸ ਉਤਪਾਦਾਂ ਬਾਰੇ ਹੋਰ ਜਾਣੋ


https://www.ymspcb.com/2-layer-immersion-gold-board-yms-pcb.html

https://www.ymspcb.com/2-layer-immersion-gold-board-yms-pcb.html


  • ਪਿਛਲਾ:
  • ਅੱਗੇ:

  • ਇੱਥੇ ਆਪਣੇ ਸੁਨੇਹੇ ਨੂੰ ਲਿਖੋ ਅਤੇ ਸਾਨੂੰ ਕਰਨ ਲਈ ਇਸ ਨੂੰ ਭੇਜਣ
    WhatsApp ਆਨਲਾਈਨ ਚੈਟ ਕਰੋ!